• 98-114AT-Bi 2nd Gen Bi-Directional Sleeve, Gear Sleeve (comes with pin) (Stainless) (Optional)
  • 98-114AT-2 2nd Gen Sleeve, Gear Sleeve (comes with pin) (Stainless) (Optional)
  • 98-114AT Original SS sleeve with standard Penn design

click on thumbnail to zoom

Description 

Multi Use: This item is used on multiple models.

Aftermarket Part - Not Manufactured by Penn
Made by a machinist as per Alan Tani's specs.

Stainless steel gear sleeve (98-114AT)
Recommended if you INTEND to apply more drag than originally intended).

See Pennparts.com section on Conv. Photo Walk-Thrus for articles/notes by Alan Tani

ADVISORY #1:

NOTE: Machining of the threads on the SS sleeves is tighter/sharper than the softer brass sleeves. The drag star may have difficulty installing, as it's threading is also brass under the chroming. If so, apply light oil/lube, keep star level and work it back and forth until it threads.


ADVISORY #2:

Tani Sleeve Generation Notes

There were 2 generations of the Alan Tani SS sleeves.
    ORIGINAL - Cut to the same design as the Penn sleeves, uses standard #4 washer under the gear.


    2nd Gen - This is cut all the way down to the ratchet on each side, allowing for the use of the Bryan Young custom washer sets.
    Set to match this 2nd Gen sleeve: 4-114HSPBY


    2nd Gen - Bi-Directional - This is cut all the way down to the ratchet on each side, allowing for the use of the Bryan Young custom washer sets. The teeth have been cut bi-directional to allow for standard and left hand reel use.
    Set to match this 2nd Gen sleeve: 4-114HSPBY
Penn Old SKU #: 98-114AT
Our Price: $38.40 EACH
Select Reel  
Generation  
Message

Question about this item specifically? (80 char max)

Quantity:
 
In Stock
Trusted SSL Certificate