The PENN Spinfisher V features their Water Tight Design so whether you dunk the reel in the surf, or let it ride in the spray all the way home, you don’t have to worry about saltwater getting into the gearbox or drag system. Penn's Slammer® Drag System is a truly sealed drag system with a total of 3 HT-100 drag washers (1 on the top of the spool, 2 underneath the spool). A Full Metal Body and sideplate keep precise gear alignment under heavy loads. Available in standard, Live Liner, Long Cast, and bail-less models.

Highlights:

Water Tight Design: Seals in key locations are used to create the new Water Tight Design in the Spinfisher V. Whether you dunk the reel in the surf, or let it ride in the spray all the way home, you don’t have to worry about saltwater getting into the gearbox or drag system.

Slammer® Drag System: A truly sealed drag system with a total of 3 HT-100 drag washers (1 on the top of the spool, 2 underneath the spool). All HT-100 washers are greased for smoothness and longevity. Extreme range, endless adjustment, and a large diameter drag knob so you can easily crank down to max drag.

Superline Spool™: No backing needed because the rubber gasket keeps superline from slipping.

Live Liner® Drag Are you a serious live bait fisherman? The Live Liner drag was built for fishing live bait. Simply pull the switch back and the front drag disengages and runs off the Live Liner drag. The Live Liner drag is a much lighter drag that lets your live bait swim free. When you get bit, simply start cranking the handle and the Live Liner drag disengages, the front drag engages, and you're tight on your fish.

Features:

  • Full Metal Body, sideplate, and rotor
  • Water Tight Design
  • Sealed HT-100 Slammer™ drag system
  • Superline SpoolTM - No backing needed because of the rubber gasket keeps superline from slipping
  • Friction trip ramp prevents premature bail trip when casting
  • Heavy-duty aluminum bail wire
  • 5 Shielded stainless steel ball bearings
  • Infinite Anti-Reverse (Back up ratchet on 7500-10500 sizes)
  • Line Capacity Rings
  • Live Liner Feature (On LL Reels)
Full Metal Body Water Tight Design Slammer Drag Superline Spool Line Capacity Rings Braid Ready Infinite Anti-Reverse Techno-Balanced Live Liner Drag

* LL - Live Liner feature for live bait fishing
** BLS - Bail-less model
*** LC - Long Cast

Model Mono Cap
(yds/lb)
Braid Cap
(yds/lb)
Bearings Max Drag
(lb)
Gear Ratio Line Retrieve
(in)
Weight
(oz)
SSV3500 390/4 • 250/6 • 210/8 230/10 • 215/15 • 165/20 5+1 20 6.2:1 30 14.4
SSV4500 300/8 • 250/10 • 185/12 365/15 • 280/20 • 200/30 5+1 25 6.2:1 34 15.4
SSV4500LL* 300/8 • 250/10 • 185/12 365/15 • 280/20 • 200/30 5+1 25 6.2:1 34 16.9
SSV5500 360/10 • 270/12 • 240/15 425/20 • 320/30 • 250/40 5+1 30 5.6:1 35 21.6
SSV6500 330/12 • 300/15 • 210/20 430/30 • 340/40 • 280/50 5+1 30 5.6:1 39 22.3
SSV6500BLS** 330/12 • 300/15 • 210/20 430/30 • 340/40 • 280/50 5+1 30 5.6:1 39 23.0
SSV6500LL* 330/12 • 300/15 • 210/20 430/30 • 340/40 • 280/50 5+1 30 5.6:1 39 25.1
SSV7500 440/15 • 300/20 • 210/30 430/40 • 360/50 • 320/65 5+1 35 4.7:1 36 28.7
SSV7500LC*** 480/12 • 370/15 • 300/20 500/30 • 400/40 • 350/50 5+1 20 4.7:1 36 27.2
SSV8500 440/20 • 300/30 • 250/40 650/40 • 540/50 • 470/65 5+1 35 4.7:1 42 31.6
SSV8500LL* 440/20 • 300/30 • 250/40 650/40 • 540/50 • 470/65 5+1 35 4.7:1 42 34.3
SSV9500 360/30 • 300/40 • 220/50 630/50 • 540/65 • 490/80 5+1 40 4.2:1 39 41.9
SSV10500 415/30 • 350/40 • 255/50 750/50 • 670/65 • 580/80 5+1 40 4.2:1 42 43.5
 
 
Displaying 1 - 12 of 13 results

Refine Results

Narrow by Manufacturer

Penn (13)

Reel Specs

Narrow by Keyword

Trusted SSL Certificate