Contact Us Customer Service
Multi Use: This item is used on multiple models.
Aftermarket Part - Not Manufactured by PennMade by a machinist as per Alan Tani's specs.
Stainless steel left hand gear sleeve (98-114AT-LH)Recommended if you INTEND to apply more drag than originally intended).
NOTE: Machining of the threads on the SS sleeves is tighter/sharper than the softer brass sleeves. The drag star may have difficulty installing, as it's threading is also brass under the chroming. If so, apply light oil/lube, keep star level and work it back and forth until it threads.ADVISORY #2:Tani Sleeve Generation NotesThere were 2 generations of the Alan Tani SS sleeves.ORIGINAL - Cut to the same design as the Penn sleeves, uses standard #4 washer under the gear. 2nd Gen - This is cut all the way down to the ratchet on each side, allowing for the use of the Bryan Young custom washer sets.Set to match this 2nd Gen sleeve: 4-114HSPBY
Question about this item specifically? (80 char max)