FREE SHIPPING OVER $100* U.S. Only
New Ecommerce store as of 10/30/23
TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support
INSTALLATION NOTES:
The one in the reel previously installed may look shorter due to compressed coils (on the smaller models).
They are hard to install if you don't know how. Bail must be in closed position, so that the little arm that the spring sits on allows the most room for the spring in the slot. Slide one end of the spring on the arm. Curve the spring so that you can tuck the other end into the far end of the spring slot. Then gently push the middle of the curve down with your finger so that the spring is in place, cover with piece of scotch tape to hold it temporarily. Put the cover back into place and just before tucking it all the way down, slide out the scotch tape. Then snug the cover down and put the screw on.
OTHER MODELS:
This spring also fits three of the Abu Garcia SX reels sizes 20, 30 and 40
Braintree by PayPal
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
