This item is used on multiple models.
Custom - NEEDS DIFFERENT STAR!
Aftermarket Part - Not Manufactured by Penn
Made by Cortez Conversions.
Gear sleeves are made to be an upgrade to the brass gear sleeve in many Penn reel models.
- Manufactured from 416, heat treated stainless steel
- Manufactured with 10 teeth (Penn only has 8)
- Fine pitch thread, requires fine pitch star 10-505 (the brass Penn sleeve used the coarse threaded 60 star)
- Recommend if you INTEND to exceed 8 pounds of drag (based on use in the 500 Jigmaster, but applies to any of the reels where you want to apply more drag than originally intended)