FREE SHIPPING OVER $100* U.S. Only
New Ecommerce store as of 10/30/23
TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support
Aftermarket Part - Not Manufactured by Penn
Made by a machinist as per Alan Tani's specs.
304 Stainless steel gear sleeve (98-60AT).
Recommend if you INTEND to exceed 8 pounds of drag (based on use in the 500 Jigmaster, but applies to any of the reels where you want to apply more drag than originally intended).
ADVISORY #1:
NOTES for the 500 and 500S reels ONLY:
This Part is used with the COARSE-TOOTHED Bridge/Star/Sleeve System.
Click Here for More Info 500 and 500S Design Change - Bridges/Sleeves/Star Drag Info
ADVISORY #2:
Tani Sleeve Generation Notes
There were 2 generations of the Alan Tani SS sleeves.- ORIGINAL - Cut to the same design as the Penn sleeves, uses standard #4 washer under the gear.
2nd Gen - This is cut all the way down to the ratchet on each side, allowing for the use of the Bryan Young custom washer sets.
Set to match this 2nd Gen sleeve: 4-500SPBY (Washer set cannot be used with any other custom SS sleeve)
Related Products
Braintree by PayPal
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
+(COARSE+THREAD)+304+Stainless+(CUSTOM)){kind=link}