FREE SHIPPING OVER $100* U.S. Only
New Ecommerce store as of 10/30/23
TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support
Aftermarket Part - Not Manufactured by Penn
Made by a machinist as per Alan Tani's specs.
Made by a machinist as per Alan Tani's specs.
304 Stainless steel gear sleeve (98-155AT)
Recommended if you INTEND to apply more drag than originally intended).
NOTES
On some older 200M reels: It has come to our attention that there was an older run of 200M reels that have the 98-60 gear sleeve on them instead of the 98-155 gear sleeve. Check the diameter of the ratchet from point to point:
98-60 = 7.5/10 in.
98-155 = 6/10 in.
At some time in the past the spindle on the bridge had a smaller diameter (0.125 or 1/8") and the sleeves had smaller holes.
ADVISORY
Tani Sleeve Generation Notes
There were 2 generations of the Alan Tani SS sleeves.- ORIGINAL - Cut to the same design as the Penn sleeves, uses standard #4 washer under the gear.
2nd Gen - This is cut all the way down to the ratchet on each side, allowing for the use of the Bryan Young custom washer sets. Set to match this 2nd Gen sleeve: Not currently offered.
Braintree by PayPal
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
+(Stainless)+(Optional)){kind=link}