FREE SHIPPING OVER $100* U.S. Only


New Ecommerce store as of 10/30/23

TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support

6/1-50 Drag Washer, HT100™ on Metal Plate (3rd Generation)

Price: $0.00

EACH

  • SKU6/1-50HT
  • Part #006-6/1-50HT
No Longer Available

Chart

Click to view a .pdf table
showing the changes
in each generation of the
Penn drags for these reels.

IMPORTANT FOR 50, 50W: PENN replaced this original 6-50 asbestos drag washer with (6/1-50) then (6A-50), both used with drive plates (117-50) for the international series reels, then later on replaced those entirely with a combined drive plate, model #117DN-50.

The 6A-50 replaced the old #6/1-50

IMPORTANT INFO FOR 80, 80W, 80S, 80SW: PENN replaced the drag washer and drive plates for the newer international series reels with a combined drive plate. Penn did not manufacture a combined drive plate specifically for the older 80, 80W, 80S or 80SW reels.

IF YOU NEED THE DRAG WASHER: Our parts dept. at www.mysticparts.com has found that:
The 117DN-50 drive plate works as a substitute for the 117-80 plate with 6A-50 washer used on the 80 and 80W
The 117DN-50 drive plate works as a substitute for the 117-80S plate with 6A-50 washer used on the 80S and 80SW.

The 117AN-80T drive plate works as a substitute for the 117A-80 plate with 6A-50 washer, which is used on the 80, 80W, 80S and 80SW. (The outside diameter is about 1/8" smaller but it will function).

IMPORTANT FOR 80ST, 80STW: Combined drive plate #117AN-80T replaces the original 117A-80/6A-50 washer
Combined drive plate #117N-80ST replaces 117-80S plate with 6A-60 washer

This screen is for ordering 6/1-50HT (HT100™ ONLY, New Old Stock - Never Used)

Braintree by PayPal
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
Todd M
Washington
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
Lin R.
Florida
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
DB K.
Delaware