FREE SHIPPING OVER $100* U.S. Only
New Ecommerce store as of 10/30/23
TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support
Fits Above Versions of 114H, 114HLW
NOTE: RARE Early versions of the 30TW and 12LT use the 34-30T stud measuring 7/32".
Match with two 152A-30T acorn nuts. Be careful not to order these by mistake!
This is the 34-114hlw short rod clamp screw (also called a stud) ONLY.
This is the short stud used with the 149-45 long nut and the thicker 33N-113 graphite clamp.
IF YOU SUSPECT YOU MIGHT HAVE THE OLDER STUDS, MEASURE THE DIAMETER OF YOUR EXISTING STUDS TO CHECK.
Most 30TW's use the standard 34-50T stud, 152A-50T nut or 34C-50T stud/nut as shown on the schematic.
Most 12LT's use the standard 34-114HLW stud, or 34C-114HLW stud/nut as shown on the schematic. The 34-114HLW is a shorter, thinner stud is used with the long nut 149-45 and the thicker graphite 33N-113 clamp.
Measurements:
34-30T 7/32" diameter threaded head, 7/32" thinner stud 1 5/8" long (uses 152A-30T nut) (34C-30T stud/nut)
34-50t 1/4" diameter threaded head, thicker stud (uses 152A-50T nut) (34C-50T stud/nut) STANDARD ON MOST 30TW REELS
34-114HLW 8/32" diameter threaded head, 5/32" thinner short stud 1 3/16" long (uses 149-45 long nut) (34C-114HLW stud/nut)
NOTE: RARE Early versions of the 30TW and 12LT use the 34-30T stud measuring 7/32".
Match with two 152A-30T acorn nuts. Be careful not to order these by mistake!
This is the 34-114hlw short rod clamp screw (also called a stud) ONLY.
This is the short stud used with the 149-45 long nut and the thicker 33N-113 graphite clamp.
IF YOU SUSPECT YOU MIGHT HAVE THE OLDER STUDS, MEASURE THE DIAMETER OF YOUR EXISTING STUDS TO CHECK.
Most 30TW's use the standard 34-50T stud, 152A-50T nut or 34C-50T stud/nut as shown on the schematic.
Most 12LT's use the standard 34-114HLW stud, or 34C-114HLW stud/nut as shown on the schematic. The 34-114HLW is a shorter, thinner stud is used with the long nut 149-45 and the thicker graphite 33N-113 clamp.
Measurements:
34-30T 7/32" diameter threaded head, 7/32" thinner stud 1 5/8" long (uses 152A-30T nut) (34C-30T stud/nut)
34-50t 1/4" diameter threaded head, thicker stud (uses 152A-50T nut) (34C-50T stud/nut) STANDARD ON MOST 30TW REELS
34-114HLW 8/32" diameter threaded head, 5/32" thinner short stud 1 3/16" long (uses 149-45 long nut) (34C-114HLW stud/nut)
Related Products
Braintree by PayPal
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
