FREE SHIPPING OVER $100* U.S. Only
New Ecommerce store as of 10/30/23
TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support
REEL DISCONTINUED BY PENN 2019
The PENN Spinfisher V features their Water Tight Design so whether you dunk the reel in the surf, or let it ride in the spray all the way home, you don’t have to worry about saltwater getting into the gearbox or drag system. Penn's Slammer® Drag System is a truly sealed drag system with a total of 3 HT-100 drag washers (1 on the top of the spool, 2 underneath the spool). A Full Metal Body and sideplate keep precise gear alignment under heavy loads. Available in standard, Live Liner, Long Cast, and bail-less models.
Highlights:
Water Tight Design: Seals in key locations are used to create the new Water Tight Design in the Spinfisher V. Whether you dunk the reel in the surf, or let it ride in the spray all the way home, you don’t have to worry about saltwater getting into the gearbox or drag system.
Slammer® Drag System: A truly sealed drag system with a total of 3 HT-100 drag washers (1 on the top of the spool, 2 underneath the spool). All HT-100 washers are greased for smoothness and longevity. Extreme range, endless adjustment, and a large diameter drag knob so you can easily crank down to max drag.
Superline Spool™: No backing needed because the rubber gasket keeps superline from slipping.
Live Liner® Drag Are you a serious live bait fisherman? The Live Liner drag was built for fishing live bait. Simply pull the switch back and the front drag disengages and runs off the Live Liner drag. The Live Liner drag is a much lighter drag that lets your live bait swim free. When you get bit, simply start cranking the handle and the Live Liner drag disengages, the front drag engages, and you're tight on your fish.
Features:
- Full Metal Body, sideplate, and rotor
- Water Tight Design
- Sealed HT-100 Slammer™ drag system
- Superline SpoolTM - No backing needed because of the rubber gasket keeps superline from slipping
- Friction trip ramp prevents premature bail trip when casting
- Heavy-duty aluminum bail wire
- 5 Shielded stainless steel ball bearings
- Infinite Anti-Reverse (Back up ratchet on 7500-10500 sizes)
- Line Capacity Rings
- Live Liner Feature (On LL Reels)
| Mono Cap. (yds/lb) | Braid Cap. (yds/lb) | Bearings | Max Drag (lb) | Gear Ratio | Line Retrieve (in) | Weight (oz) |
|---|---|---|---|---|---|---|
| 440/20, 300/30, 250/40 | 650/40, 540/50, 470/65 | 5+1 | 35 | 4.7:1 | 42 | 34.3 |
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
